Editing Super Capacitor (section)

===Exfoliation===
[https://www.youtube.com/watch?v=gcwCGRXVHzQ Graphene - A Simple Method For Mass Production] - 23 Jul 2016 - From Graphite. 0.5 moller of Sodium sulfate. Stainless Steel Electrode. Needs electrolysis then sonification.

[https://www.youtube.com/watch?v=oisuvRXFU_8 Easy Graphene Sheets-Laminator & Graphite] - m3sca1. Uses a lamination. 10MΩ ☹

[https://www.youtube.com/watch?v=rPq4TA9mKvk Pristine Exfoliation of Graphene Using Ammonium Hydroxide]

[https://www.youtube.com/watch?v=VHz1FuDjYfc Simple electro-chemical method for graphite exfoliation] - 21 Aug 2016 - Confirming Robert Smith's method.

[https://www.youtube.com/watch?v=Dzfo09rNpXQ Electrochemical graphite exfoliation attempt 2 with the correct process] - 22 Aug 2016

[https://www.youtube.com/watch?v=xrp4NzIe-B8 Talga Exfoliation Process] - 18 Nov 2015 - "So an aqueous solution of ‎na2so4 and k2so4?" - na2so4=Sodium sulfate, k2so4=Potassium sulfate

[http://www.kurzweilai.net/how-to-tune-graphene-properties-by-introducing-defects How to tune graphene properties by introducing defects]

[https://www.youtube.com/watch?v=KzkYZxtNzMQ electrochemical exfoliation H2SO4 KOH] - 11th Feb 2015 - Short, talks about switching voltage.

[https://www.youtube.com/watch?v=TCp6nTNG6jk Early Pulsed Electrolysis System Investigation] - Uses a Joule Thief System.

[https://www.youtube.com/watch?v=3SW90hsBu1Q Electrochemical Exfoliation of Graphene - Quick and Easy] - Kingswell Labs. "could you use koh or something else?", "Yes, you can use any electrolyte for this method.  I haven't used any other methods since I have H2SO4 on hand so I couldn't say if anything else would work better.", "Sodium sulphate"

[https://www.youtube.com/watch?v=6M8mg2nDkL4 Nanotechnology: CVD Graphene Transfer] - 2mL 69% Nitric Acid to 6mL Deionized Water.

"Ammonium persulfate [NH4)2S2O8 aka PCB etcher, stainless mesh + lump of graphite worked rather too well for this experiment. I'll admit to trying fairly liquid but that was just a load of bubbles :)"