Buy

Tools on dx.com

• Centre Punch
• Dial guage?
• Dowling Tool (for right angle drilling).
• Flexible Coolant Pipes
• Mitre Box. (Have one)
• Try Square. (Right Angle)

Molding/Casting

• Transparent Silicon

Wood

• Drill saw blades.
  • 28-in-1 Stainless Steel + Copper + PVC Wood Grinding Tool Set
  • 6pc HSS Circular Saw Blade Set For Metal & Dremel Rotary Tools
  • 6pcs Metal HSS Circular Saw Blade Set Cutting Discs for Dremel Rotary Tool

• 10/13mm Electric Drill Cutting Seat Stand Machine Bracket Rod Bar Table with 2 Wrench - $16

• 25-150mm Magnetic Hex Anti Slip Screwdriver Bit Long Screw Nut Torx PH2 - ~$2

• Bolts/Nuts/Threaded Rods. M3?, M5?

Electronics

• Breadboard pins & Pin headers
• LM1117 (VReg does 5v to 3.3]
• Breakout Board DAC
• ESP-12 Breakout Boards x2

RepRap Gen7 Electronics

• Nicromium Wire, Kanthal Wire is apparently better
• DIY Oscilloscope DSO138 (preassembled with case for $30) - http://www.banggood.com/search/dso138.html + USB TTL (Or make an Arduino/soundcard one).
• DC-DC stepdown powersupply $7

• Vaccume Desolderer

• Tiny stepper motors (5 are like $4)

• Transistor/Capacitor tester ($12)

• 2x Wireless modules. ESP8266 ESP-03, About $3 on ebay. (Remember to look up voltage divider). Need USB Serial programmer, FTDI with 3.3v support.

• Photodiodes

Solder

Element14 - DURATOOL SOLDER WIRE, 63/37, 183DEG C 226.796g - 0.64mm/0.025"- $31.44 + shipping?

Digikey MultiCore C502 227g, 3% flux, 63/37, 0.015"/0.39mm - $25.01 + probably $30 shipping...

Digikey Multicore Infos

110 GRAM REEL OF HIGH QUALITY 0.7mm LEADED MULTICORE SOLDER - $8.72 + $5.24 shipping.

Loctite 60/40 C511 5C 0.46mm 0.25kg $27+$11

Multicore X39 60/40 No Clean Solder Wire, 0.56mm, 0.25kg $26+$11 - According to Digikey Loctite is the new name...

Multicore Size 10 Reel Alloy Solder O.7mm Diameter 60/40 0.7mm - $27.00 (free shipping?)

Multicore SOLDER wire 250g 0.7mm - 60/40 ERSIN 309???- $28

• Kester 44=RA, Kester 285=RMA

• different kinds of lead-free solders. Not really happy with Sn99.3Cu0.7 solder, but I've used Sn100Ni+ lately and that's pretty great.

• Core size/flux amount in solder wire = 3.3% (sometimes called 66 core or P3)

Flux

MG Chemicals 835

Digikey Fluxpen - Digikey has basically no flux choices

Mouse Flux choices

This flux pen... - $13.10

DIY/homemade Rosin flux with Isopropyl alcohol/glycerine/rosin? - flakes off a resin block / fluxoff comparison

That said, MG Chemicals 835 (liquid RA), is available in small bottles that are reasonably priced which is very useful for hobbyists (125ml and 1L sizes), and is easily found in North America, the UK and EU. Not sure about other markets.  :-// Kester flux is excellent stuff IME (186, 186-18, and 1544 are all liquid & rosin based). Unfortunately, Kester only offers their fluxes in disposable pens or large containers (1gal & larger, up to 55gal drum). It's readily available in the US, and although can be had in the UK/EU, it's expensive as it's usually shipped from the US from what I've seen (Farnell).

For paste, Kester RF741 is a modified rosin no-clean that's very nice to use (comes in a syringe). Amtech is supposed to be good as well (also a syringe), but the real stuff is hard to find as their distribution is nearly non-existent (highly counterfeited too).

FWIW, I usually use liquid in a refillable brush pen as it's less expensive and gives me better control than the disposable pens.]

3D Printer

• Casting Resin
  • 2.3kg of Hydrocal is about $75, 100 pounds hcal to 45 water
• 4x Stepper Motors - NUMA 17
• Filament
• Hot Head
• Extruder

Gardening

Crystal Soil

• AU Seller 13*10g=130g for 17.95. - $0.138 per g

• 100 packs China 100*3g = 300g for $11.95 - 0.0398 per g

• Banggood - 50*4g = 200g for $8.53 - 0.0426 per g