Electronics: Difference between revisions
Jump to navigation
Jump to search
(→DSO138) |
|||
| Line 16: | Line 16: | ||
* [https://developer.mbed.org/users/mega64/code/mbed-STM32F103C8/diff/e3d4af315dd8/targets/cmsis/TARGET_STM/TARGET_STM32F0/TARGET_NUCLEO_F042K6/cmsis_nvic.c This might be about the bootloader...] |
* [https://developer.mbed.org/users/mega64/code/mbed-STM32F103C8/diff/e3d4af315dd8/targets/cmsis/TARGET_STM/TARGET_STM32F0/TARGET_NUCLEO_F042K6/cmsis_nvic.c This might be about the bootloader...] |
||
===ESP-12F=== |
|||
[https://github.com/esp8266/Arduino/blob/master/doc/boards.md#generic-esp8266-modules Bootloading/Usage pinouts...] |
|||
===Capacitors=== |
===Capacitors=== |
||
Revision as of 11:14, 27 November 2016
DSO138
stm32flash -v -b 115200 /dev/ttyUSB0 -w 113-13801-061.hex r2 ../src/firmware-src/libdso138.a -b16 -aarm -AA
- "Supports two types of TFT controllers (ILI9341 and ILI9325/9328)."
- Mine is a ILI9341...
- CPU is: STM32F103C8. Does not support DFU (usb bootloader).
- Calling the STM32 SystemMemory Bootloader from your application
- how to use STM32 system memory boot modes
- StackOverflow Question
- libopencm3/libopencm3-examples
- libopencm3/libopencm3
- Post on bare STM32 dev
- USB HID on STM32F042
- This might be about the bootloader...
ESP-12F
Capacitors
This info on LM1117 capacitors....
- The minimum output capacitance required by the LM1117 is 10µF...
- The ESR of the output capacitor should range between 0.3Ω - 22Ω.
Misc
Controlling Lots of Outputs from a Microcontroller and lost of other's on the blog.
Simple Latch MOSFET
Pull down to voltage 5 volts
Resister Ladder
Complete
Stripboard
Negative voltage
FPGA
ICE40 UL1k