Buy: Difference between revisions
Jump to navigation
Jump to search
(→Wood) |
(→Wood) |
||
| Line 18: | Line 18: | ||
* [http://www.banggood.com/1013mm-Electric-Drill-Cutting-Seat-Stand-Machine-Bracket-Rod-Bar-Table-with-2-Wrench-p-1052866.html 10/13mm Electric Drill Cutting Seat Stand Machine Bracket Rod Bar Table with 2 Wrench] - $16 |
* [http://www.banggood.com/1013mm-Electric-Drill-Cutting-Seat-Stand-Machine-Bracket-Rod-Bar-Table-with-2-Wrench-p-1052866.html 10/13mm Electric Drill Cutting Seat Stand Machine Bracket Rod Bar Table with 2 Wrench] - $16 |
||
* [http://www.banggood.com/25-150mm-Magnetic-Hex-Anti-Slip-Screwdriver-Bit-Long-Screw-Nut-Torx-PH2-p-981860.html 25-150mm Magnetic Hex Anti Slip Screwdriver Bit Long Screw Nut Torx PH2] - ~$2 |
|||
==Electronics== |
==Electronics== |
||
Revision as of 13:07, 28 August 2016
Tools on dx.com
- Centre Punch
- Mitre Box.
- Dial guage?
- Try Square. (Right Angle)
- Dowling Tool (for right angle drilling).
Molding/Casting
- Transparent Silicon
Wood
- Drill saw blades.
Electronics
* 2x Wireless modules. ESP8266 ESP-03, About $3 on ebay. (Remember to look up voltage divider). Need USB Serial programmer, FTDI with 3.3v support.
- Photodiodes
- Nicromium Wire
- Tiny stepper motors (5 are like $4)
- Transistor/Capacitor tester ($12)
- DIY Oscilloscope DSO138 (preassembled with case for $30) - http://www.banggood.com/search/dso138.html + USB TTL (Or make an Arduino/soundcard one).
- DC-DC stepdown powersupply $7
3D Printer
- Casting Resin
- 2.3kg of Hydrocal is about $75, 100 pounds hcal to 45 water
- 4x Stepper Motors - NUMA 17
- Filament
- Hot Head
- Extruder