Electronics: Difference between revisions
Jump to navigation
Jump to search
(→DSO138) |
(→DSO138) |
||
| Line 5: | Line 5: | ||
* "Supports two types of TFT controllers (ILI9341 and ILI9325/9328)." |
* "Supports two types of TFT controllers (ILI9341 and ILI9325/9328)." |
||
* Mine is a ILI9341... |
* Mine is a ILI9341... |
||
* CPU is: STM32F103C8. Does not support DFU (usb bootloader). |
* CPU is: [STM32F103C8](http://www.st.com/en/microcontrollers/stm32f103c8.html). Does not support DFU (usb bootloader). |
||
* [https://www.youtube.com/watch?v=cvKC-4tCRgw Calling the STM32 SystemMemory Bootloader from your application] |
* [https://www.youtube.com/watch?v=cvKC-4tCRgw Calling the STM32 SystemMemory Bootloader from your application] |
||
Revision as of 13:23, 26 November 2016
DSO138
stm32flash -v -b 115200 /dev/ttyUSB0 -w 113-13801-061.hex r2 ../src/firmware-src/libdso138.a -b16 -aarm -AA
- "Supports two types of TFT controllers (ILI9341 and ILI9325/9328)."
- Mine is a ILI9341...
- CPU is: [STM32F103C8](http://www.st.com/en/microcontrollers/stm32f103c8.html). Does not support DFU (usb bootloader).
- Calling the STM32 SystemMemory Bootloader from your application
- how to use STM32 system memory boot modes
- StackOverflow Question
- libopencm3/libopencm3-examples
- libopencm3/libopencm3
- Post on bare STM32 dev
- USB HID on STM32F042
Misc
Controlling Lots of Outputs from a Microcontroller and lost of other's on the blog.
Simple Latch MOSFET
Pull down to voltage 5 volts
Resister Ladder
Complete
Stripboard
Negative voltage
FPGA
ICE40 UL1k