Revision as of 08:31, 31 March 2021

Tracking

Drip thing. Need to decide between screw in version, or the one that requires the printer to be partially dissembled.
Knob
Handle
Exhaust?
~~Nut measure thing?~~
Lego Bricks
Test Miniature(s)
Calibration Cube/Town
Vat Lid (Needs Knob mod)
D100 dice, other cool dice

UV Clear Coat
Flexible Build Plate - NEED ZAXIS adjust - Wham Bam $42 (20-60 days, or $56 in 7-12 days) or MAOI (on Amazon) ($35.86 in 48-55 days), DIY
NEED FEP - It's about $22 for 5 on ebay
Booster Fan Extractor

Trisodium Phosphate, "I have a new winner to clean my prints. Trisodium Phosphate (TSP) works better than everything I have used to date. I have been using Simple Green and Mr Clean in my cleaning process (Uncle Jessy's alternative cleaner video) but I have now found a hands down winner. 1/8 Tsp to 1 cup of warm water in my pre-rinse for 5min, same concentration for 5min in ultrasonic (30°C) for 5 min. rinse in clean water and dry. No residue.". $22 for 1kg on ebay.

@@ Line 35: / Line 35: @@
 * [https://youtu.be/wQ8cIOtT3ug?t=106 ISOGrids]
 * [https://www.youtube.com/watch?v=71vWnCDio64 had picture of GW space marine]
-* arctan(layer_height/pixel_width), arctan(0.50/0.50)=45, arctan(0.25/0.50), 26.5650512°
+* arctan(layer_height/pixel_width)
+** arctan(0.50/0.50)=45°
+** arctan(0.25/0.50), 26.5650512°
+** arctan(0.50/0.050) = 84.2894069°
+** arctan(0.25/0.050) = 78.6900675°
+** arctan(0.50/0.051)
 =Supplies=