Buy

Tools on dx.com

• Centre Punch
• Dial guage?
• Dowling Tool (for right angle drilling).
• Flexible Coolant Pipes
• Mitre Box. (Have one)
• Try Square. (Right Angle)

Molding/Casting

• Transparent Silicon

Wood

• Drill saw blades.
  • 28-in-1 Stainless Steel + Copper + PVC Wood Grinding Tool Set
  • 6pc HSS Circular Saw Blade Set For Metal & Dremel Rotary Tools
  • 6pcs Metal HSS Circular Saw Blade Set Cutting Discs for Dremel Rotary Tool

• 10/13mm Electric Drill Cutting Seat Stand Machine Bracket Rod Bar Table with 2 Wrench - $16

• 25-150mm Magnetic Hex Anti Slip Screwdriver Bit Long Screw Nut Torx PH2 - ~$2

• Bolts/Nuts/Threaded Rods. M3?, M5?

Electronics

• Breadboard pins & Pin headers
• LM1117 (VReg does 5v to 3.3]
• Breakout Board DAC
• ESP-12 Breakout Boards x2

RepRap Gen7 Electronics

• Nicromium Wire, Kanthal Wire is apparently better
• DIY Oscilloscope DSO138 (preassembled with case for $30) - http://www.banggood.com/search/dso138.html + USB TTL (Or make an Arduino/soundcard one).
• DC-DC stepdown powersupply $7

• Vaccume Desolderer

• Tiny stepper motors (5 are like $4)

• Transistor/Capacitor tester ($12)

• 2x Wireless modules. ESP8266 ESP-03, About $3 on ebay. (Remember to look up voltage divider). Need USB Serial programmer, FTDI with 3.3v support.

• Photodiodes

Solder

Digikey MultiCore 227g, 3% flux, 63/37, 0.015"/0.39mm - $25.01

3D Printer

• Casting Resin
  • 2.3kg of Hydrocal is about $75, 100 pounds hcal to 45 water
• 4x Stepper Motors - NUMA 17
• Filament
• Hot Head
• Extruder

Gardening

Crystal Soil

• AU Seller 13*10g=130g for 17.95. - $0.138 per g

• 100 packs China 100*3g = 300g for $11.95 - 0.0398 per g

• Banggood - 50*4g = 200g for $8.53 - 0.0426 per g